Tag: Strom

  • Where electricity will come from in 2050

    Where electricity will come from in 2050

    For Switzerland to become CO₂-neutral by 2050, transport, heat supply and industry must be largely electrified. Today’s electricity demand of 56 terawatt hours will increase to around 75 TWh by 2050. At the same time, 23 TWh will come from nuclear energy. The necessary reorganisation of the energy system is far-reaching in technical, economic and social terms.

    Massive expansion of renewable energy
    According to the EDGE report, around 60 % of electricity must be covered by new renewable energies by 2050, specifically 45 TWh per year. This would be possible with 28 TWh from photovoltaics, 13 TWh from wind power and 4 TWh from biomass. To achieve this, photovoltaic capacity would have to be quadrupled to 26.8 GW. Wind power would need to be expanded 80-fold to 8.4 GW, especially for winter operation. According to the researchers, this is hardly realisable without strong subsidies.

    Limiting electricity imports makes the system more expensive
    The new Electricity Act limits net electricity imports in winter to 5 TWh. In order to meet this target, an additional 80 % more wind power, 11 % more gas capacity and 10 % more solar capacity would be required. This would increase electricity generation costs by 20 % and electricity prices could more than double.

    Europe remains decisive
    If European electricity trading were to be severely restricted, e.g. through a 70 % reduction in cross-border grid capacities, Switzerland would have to expand wind power by a further 20 %. Supply costs would rise by an additional 8 %. A survey by the EDGE consortium shows the conflicting priorities. 60 % of the population would like to cooperate with Europe, while at the same time 70 % want energy independence and favour domestic energy sources.

    Investments flow abroad
    Another study shows that more than half of the annual investments made by Swiss energy suppliers in large-scale renewable energy projects are channelled mainly to Germany, France and Italy. Only 1 % of these funds are invested in Switzerland. There is a lack of suitable projects or framework conditions in Switzerland. This means that Switzerland is often financing the energy transition indirectly, but not at home.

    Net zero has its price
    The cost of living could rise between 2020 and 2050, for example due to CO₂ taxes, emissions trading or higher production costs. The annual consumption loss of a household could be 0.63-0.75 %, depending on the global climate protection pathway. Without offsetting options abroad, the costs could rise to up to 1%. In the long term, however, this would be more favourable than the consequences of unchecked climate change.

    The energy transition is feasible and challenging
    A CO₂-neutral electricity supply by 2050 is technically possible if photovoltaics and wind power are massively expanded, imports are used intelligently and investments are channelled in a targeted manner. Access to the European electricity market remains crucial. At the same time, we need broad social support and an understanding that inaction will be more expensive than a bold transformation.

  • Europe’s electricity mix is changing

    Europe’s electricity mix is changing

    Germany produced around 40 terawatt hours of solar power between January and June 2025, an increase of 30 per cent compared to the same period last year. France, Belgium, Denmark and Poland also recorded growth in photovoltaics. The expansion is having an impact, but the parallel lull in wind power weighed on the overall balance. At 60.3 TWh, wind power generation was around 18% down on the previous year. As a result, the share of renewable energies in net public electricity generation in Germany fell slightly to 60.9% (2024: 65.1%).

    Europe-wide trend with regional differences
    Within the EU, combined electricity generation from wind and solar fell slightly to 344.4 TWh in the first half of 2025, compared to 358.1 TWh in the previous year. The figures from Fraunhofer ISE show that while solar expansion is bearing fruit in many countries, meteorological fluctuations such as wind lulls are having a greater impact.

    Electricity trading adapts to
    Germany imported 7.7 TWh of electricity in the first half of the year, primarily from Scandinavia, where wind and hydropower continue to offer favourable prices. These imports were more attractively priced than domestic electricity from fossil-fuelled power plants. Exports went to Austria, the Czech Republic and Poland, among others.

    Electricity prices rise slightly – customer prices stable
    After falling in recent years, the average exchange electricity price rose again to €86.64/MWh in the first half of 2025. The highest prices were recorded in January and February, when there was little wind. At an average of 27 cents per kilowatt hour in June, electricity prices for new customers were back at the 2021 level.

    CO2 costs and gas prices on the rise again
    In parallel with the electricity market, CO₂ certificate prices rose by 11 per cent compared to the previous year, and natural gas was also more expensive than in the first half of 2024. These developments illustrate how sensitively the energy market reacts to fluctuations in supply and political conditions and how important a sustainable, resilient energy infrastructure is.

  • Federal government selects five reserve power plants

    Federal government selects five reserve power plants

    Following its meeting on 14 May 2025, the Federal Council will conclude contracts with energy service providers for the operation of five reserve power plants. According to a press release, the Swiss Federal Office of Energy(SFOE) has conducted direct negotiations with potential providers in advance. Following the end of the tendering process in February 2025, the Federal Department of the Environment, Transport, Energy and Communications(DETEC) decided to select five projects with a total capacity of 583 megawatts (MW).

    The selected projects include the reserve power plant Monthey VS with 55 MW from CIMO, the reserve power plant Sisslerfeld 1 in the municipality of Eiken AG with 13 MW from Getec, the reserve power plant Stein AG with 44 MW from Getec, the reserve power plant Sisslerfeld 2 in Eiken AG with 180 MW from Sidewinder and the reserve power plant Auhafen in Muttenz BL with 291 MW from Axpo. All five plants will run on CO2-neutral fuel, according to the press release.

    The five projects should be ready for operation between 2027 and 2030. For the transition, DETEC is currently working on variants using hydropower, emergency power generators and consumption reserves.

  • Solar folding roof technology sets course for the German market

    Solar folding roof technology sets course for the German market

    According to a press release, dhp Technology AG has founded a subsidiary in Stuttgart, Germany. The provider of the “globally unique solar folding roof” is thus emphasising its ambition to drive forward the energy transition with innovative photovoltaic solutions in Germany too, the press release continues. With the establishment of dhp Technology Deutschland GmbH, the company is laying the foundations for a long-term presence in the German market.

    “The expansion into Germany is a logical consequence of the sharp rise in demand for our innovative photovoltaic solution,” said co-founder and CEO Gian Andri Diem. In Germany, the market potential for solar folding roofs is huge, particularly with regard to sewage treatment plants, car parks and logistics areas.

    The branch in Stuttgart is managed by Gian Andri Diem, CEO of dhp Technology, and Torsten Brandstetter as Managing Director. Brandstetter is an industrial engineer with experience in the energy industry and technological innovation.

    dhp Technology is a developer and supplier of solar folding roofs. These are specially designed for installation over sealed surfaces and existing infrastructures. Depending on the weather, they fold up or down automatically. This enables communities and companies to produce electricity locally and sustainably without taking up additional ground space.

    Solar folding roofs from dhp Technology are already in operation at three German sewage treatment plants. A further ten systems are in the implementation phase and are due to be connected to the grid this year, according to the company press release.

  • Renewables hold a high share of electricity and heat

    Renewables hold a high share of electricity and heat

    The conversion of the Swiss energy supply to renewable sources is only making slow progress. This is shown by the seventh benchmark study by the Swiss Federal Office of Energy(SFOE), in which 111 energy suppliers from all over Switzerland took part this time.

    According to the study, the share of renewables has stagnated compared to the sixth study in 2021/22 for the participating suppliers at just over 80 per cent for electricity, slightly below that for heat and just under 10 per cent for gas. Four suppliers have already met the targets for electricity with over 90 per cent, including Energie Wasser Bern(ewb) and Services Industriels de Genève with 95 per cent and Eniwa in Aarau and EWZ in Zurich with 94 per cent. In the heat sector, EWZ is ahead with 95 per cent and Energie Uster and Eniwa with 92 per cent target fulfilment each. In the gas supply sector, only ewb with 88 per cent and Technische Betriebe Glarus with 84 per cent are above 80 per cent target fulfilment.

    Digitalisation is a major challenge for small suppliers in particular. A quarter of them do not even have a strategy for this. Just under half have a strategy, but no specific targets.

    Energy efficiency measures are also lagging behind. Only 45 per cent of the participating electricity suppliers already have a strategy with quantified targets.

    According to a BfE press release on the study, the benchmarking itself has contributed to knowledge transfer in the sector with webinars, events and information material.

  • Snow melting and economic efficiency in practice for PVT modules

    Snow melting and economic efficiency in practice for PVT modules

    In their award-winning bachelor’s thesis at the Zurich University of Applied Sciences, Fabian Maag and Marc Willi investigate the potential of photovoltaic thermal modules to increase winter electricity production. The PVT modules from Sunmaxx PVT GmbH use liquid heating to melt snow off the modules and thus increase the electricity yield. Their measurements show that the targeted melting of snow can increase electricity production in winter by an average of 34%.

    Efficiency through snow melting
    The study showed that the combination of a higher inlet temperature and continuous melting during snowfall is particularly effective in minimising snow cover. This method proves particularly effective in snowy regions and also at lower altitudes, as the additional electricity yield always exceeds the required melting energy.

    Economic profitability
    The profitability analysis shows that the additional costs for installing a PVT system through snow melting are amortised from an electricity price of CHF 0.39/kWh. PVT modules are therefore not only technically but also economically attractive, particularly in regions with high snowfall.

    Recognising and promoting young talent
    Maag and Willi were honoured with the regional Siemens Excellence Award for their practice-oriented and forward-looking work and have been nominated for the national Siemens Excellence Award 2025. Gerd Scheller, Country CEO of Siemens Switzerland, emphasises the importance of promoting young talent: “With the Excellence Award, we want to motivate young people to work on scientific topics that can be put into practice.”

    Future prospects in STEM
    The Siemens Excellence Award is part of the “Future Creators” programme, which promotes dialogue with the next generation and supports young talent in STEM (science, technology, engineering and mathematics). Gerd Scheller emphasises: “With this commitment, we support young people in their development and training and help them to make the most of their future opportunities.”

    Maag and Willi’s work provides valuable insights into the use of PVT modules to increase the efficiency of winter electricity production. Their findings not only contribute to the scientific debate, but also offer practical solutions to the challenges of the energy transition.

  • Resource efficiency through medium voltage in photovoltaics

    Resource efficiency through medium voltage in photovoltaics

    The conversion of the energy system requires considerable quantities of raw materials such as copper and aluminium. One promising approach to saving these resources is the transition from low voltage to medium voltage in renewable energy production. The Fraunhofer Institute for Solar Energy Systems ISE has identified enormous savings potential through higher system voltages, particularly for large-scale photovoltaic power plants, and is planning initial pilot projects and a broad market launch.

    Advantages of higher system voltages
    Increasing the system voltage from 800 VAC to 1,500 VAC reduces the cable cross-section by around 75 per cent. This makes installation and connection easier, which reduces installation costs. Andreas Hensel, Group Manager “High Power Electronics and System Technology” at Fraunhofer ISE, emphasises the potential savings: “Now that PV module costs have fallen by 90 percent since 2010, installation and balance-of-system components now offer the greatest savings levers.”

    In addition, the output of the subsystems can be increased by switching to medium voltage. At a voltage of 1,500 V, 10 to 12 MVA are already possible in one transformer instead of the 3 to 5 MVA that are common today. This reduces the number of transformers and switchgear required, which further reduces construction and installation costs.

    Technological advances and initial successes
    Progress in medium-voltage technology has been made possible by the development of highly blocking silicon carbide components with high switching speeds. SiC components up to 3.3 kV are now ready for the market. In the “MS-LeiKra” project, Fraunhofer ISE developed and successfully commissioned the world’s first MS-PV string inverter in 2023. The inverter achieves an output voltage of 1,500 VAC with an output of 250 kVA. “Technologically, the course has been set and it is now a question of who will be the first players in this promising market,” says Christian Schöner, Project Manager “Medium Voltage” at Fraunhofer ISE. A first photovoltaic pilot system based on this inverter is already being planned.

    Cooperation for the breakthrough
    In April, a European consortium was formed that brings together representatives from all trades involved in a large-scale PV power plant. The aim is to jointly investigate and overcome the technological and standardisation requirements for the leap to medium voltage. “As a powerful consortium, we can tackle the existing hurdles together and achieve optimisation for the entire power plant,” explains Christian Schöner.

    Future prospects and areas of application
    Large-scale PV power plants are just the beginning. Medium-voltage technology also offers potential for charging infrastructures, industrial grids, large heat pumps, battery storage systems, electrolysers and wind turbines. In addition to considerable material, cost and space savings, higher system voltages also enable new system architectures for renewable hybrid power plants. These can be linked together via the medium voltage and thus ensure an efficient and sustainable energy supply.

  • Paradigm shift in energy planning

    Paradigm shift in energy planning

    Numerous countries have committed to being climate-neutral by 2050. For building and energy systems, this requires a rapid transition from fossil fuels to renewable energies and greater networking of different sectors. Buildings, mobility, industry, electricity, heat and synthetic fuels must interact and be planned in an integrated manner. Matthias Sulzer from Empa and Michael Wetter from the Lawrence Berkeley National Laboratory argue that the current planning processes do not do justice to this complexity and that a paradigm shift is therefore necessary.

    Current planning process – a silo mentality
    Today’s planning processes are organised by discipline, which leads to inefficient and suboptimal results. Engineers and architects work one after the other instead of collaborating across disciplines. This linear, “waterfall” approach leaves little room for iteration and optimisation in the overall system. Sulzer emphasises that this approach is no longer sufficient to meet the requirements of future, flexible energy systems.

    Inspiration from the chip industry
    Sulzer and Wetter propose a planning approach inspired by the chip industry. The electronics and computer scientist Alberto Sangiovanni-Vincentelli has revolutionised chip manufacturing with his “platform-based design”. This concept uses different levels of abstraction for the holistic analysis and optimisation of systems and creates universally valid, modularly combinable models. This model could also be applied to building and energy systems in order to automate and modularise planning.

    Advantages of a model-based planning process
    A model-based planning process would mean that models are used not only to analyse, but also to specify and build systems. These blueprints could be combined in a modular way to clearly define the design and functionality of a system. This would revolutionise planning, construction and operating processes and promote the necessary digitalisation and automation to achieve the ambitious decarbonisation targets.

    Pilot project at Empa
    The EU project GOES, led by Empa, is a first step towards the application of platform-based design in the energy sector. A pilot plant with 144 geothermal probes is being developed on the Empa campus in Dübendorf as the first application of this concept. The aim is to define the various abstraction levels of decision-making and to standardise the interfaces.

    The implementation of an automated and modular planning process is crucial for achieving climate neutrality by 2050, and Sulzer and Wetter are convinced that this paradigm shift will significantly increase the flexibility and efficiency of energy systems. The approach offers a promising solution to meet the challenges of decarbonisation and ensure security of supply.

  • Energy crisis 2022 leaves its mark on the financial year

    Energy crisis 2022 leaves its mark on the financial year

    Region Energie Solothurn also felt the consequences of the 2022 energy crisis in 2023. According to a press release, the regional supplier posted a loss of CHF 760,374. It blames this on record-high purchase prices, which have a delayed effect until 2024. It has not passed these on to customers in full.

    Gas sales to business and small customers fell by 4.6 per cent to 334 gigawatt hours in 2022. Sales to large customers even fell by 19.4 per cent to 394 gigawatt hours. Regio Energie Solothurn refers to the measures taken by the federal government, under which the industry was required to switch from gas to oil.

    Electricity sales increased by 11.1 per cent to 130 gigawatt hours. The company points out that it has also been supplying the municipalities of Lommiswil SO and Nennigkofen SO since January 2023. On the other hand, the grid levy has fallen because more solar power is being produced for the company’s own consumption instead of being fed into the grid.

    Regio Energie has also completed the biogas pipeline between Utzenstorf BE and Gerlafingen SO. This means that the planned biogas plants in Utzenstorf can be realised.

  • Researchers use AI to develop new solar cells

    Researchers use AI to develop new solar cells

    As part of a research project at the Swiss Federal Institute of Technology in Lausanne(EPFL), a method has been developed to search large databases for potential materials for the utilisation of new solar cells. According to a press release, several promising halide perovskites were identified through the use of machine learning (ML). ML is a branch of artificial intelligence in which computers learn from data sets or databases made available to them.

    Perovskites represent a promising new group of materials for future photovoltaic applications due to their simple manufacturing processes combined with low costs. It is important that the new materials have a suitable band gap so that they can utilise solar energy optimally. The band gap has the property of absorbing photons with a certain energy and then converting them into electricity.

    The EPFL team led by Haiyuan Wang and Alfredo Pasquarello developed a machine learning model that was able to identify 14 completely new perovskites from 15,000 materials. These are excellent candidates for future high-efficiency solar cells. The researchers were thus able to show that the use of ML can significantly accelerate the discovery and validation of new photovoltaic materials.

  • A new home for families and creativity in Leutschenbach

    A new home for families and creativity in Leutschenbach

    The centrepiece of the housing estate consists of two U-shaped building complexes that are open to the green space and are complemented by pavilion buildings in the inner courtyard. This arrangement creates a lively, communal courtyard that houses kindergartens and communal spaces, making it a social meeting point.

    The housing estate offers a variety of 2- to 6½-room flats as well as special studio and communal flats to fulfil a wide range of living requirements. Particular attention is paid to spacious family flats and creative spaces that enable flexible and innovative living.

    Sustainability and energy efficiency are the focus of the housing estate. By building to Minergie-P-ECO and Minergie-ECO standards and utilising renewable energy sources for heat and electricity, it makes an important contribution to climate protection. The large-scale installation of photovoltaic modules ensures an environmentally friendly power supply.

    The design of the outdoor facilities promotes biodiversity and improves the microclimate in the neighbourhood. The upgrading of the green spaces along the Riedgraben and the “Inner Garden Leutschenbach” connecting the neighbourhood create natural recreational areas that offer residents a high quality of life.

    The Leutschenbach housing estate is an example of the successful combination of urban living, social mixing and ecological responsibility. It plays a key role in the development of Leutschenbach into an attractive and lively neighbourhood that meets the requirements of a modern, sustainable lifestyle.

  • “Fischermätteli” first site with Minergie certificate

    “Fischermätteli” first site with Minergie certificate

    The innovative and long-term residential construction project Fischermätteli was successfully completed by Strüby Unternehmungen in autumn 2023 after a staggered construction period of around three and a half years. The ten apartment blocks with a total of 168 condominiums were built on a former commercial site in Burgdorf BE. Over 6600 m3 of Swiss wood was used in the construction, which serves as a natural CO2 reservoir and has an excellent ecological footprint thanks to the short transport routes.

    One hundred per cent of the energy requirements for the entire site are covered by renewable sources. The electricity comes from the PV systems on the roofs of the buildings, while the heat for heating and hot water comes from a heating centre that runs on Swiss pellets. The well thought-out mobility concept is based on electric mobility, car sharing, bicycles and public transport. A co-working space supports working from home and thus indirectly relieves traffic congestion. In addition, the environmental design based on the sponge city principle ensures natural and efficient cooling in summer and turns the project into a true biodiversity hotspot thanks to the wide variety of native plants.

    Label with high requirements
    In April 2024, the largest real estate project to date was awarded the coveted certificate by the Minergie association: the Minergie-Areal label, having already been awarded the Minergie-A-ECO label. The new standard, which has been in place since September 2023, is supported by various organisations such as the Minergie Association, the cantons, the business community and the Swiss Federal Office of Energy. The Minergie site is characterised by minimal energy consumption, minimised greenhouse gas emissions during construction and operation and maximum self-sufficiency with renewable energies. The buildings have particularly efficient heat insulation and controlled air exchange. In addition, the outdoor space of the Minergie site is designed in such a way that climate resilience and quality of stay are increased, for example through green planting and shading options. Another advantage of the Minergie site is the promotion of climate-friendly mobility.

    The development in Burgdorf BE sets new standards in timber construction for flats. With 168 owner-occupied flats in ten apartment blocks, it is the largest construction project of its kind to combine Swiss timber and the Minergie-A-ECO standard. Sustainability aspects were at the centre of the project right from the start, which earned it the first Minergie-Areal certificate for a completed project.

    Thanks to the elegant timber façades, the ensemble blends in perfectly with its natural surroundings. The clearly defined meeting and play zones with village charm promote relationships between the residents. At the same time, the architecture ensures privacy and creates living spaces with ideal air, light and sound characteristics. Community-enhancing elements such as a spacious communal pavilion and the professional home office zone “fm produktiv” round off the offer.

    The flats offer 2.5 to 5.5 rooms and are designed for singles, couples and families of all ages. The floor plans are flexibly designed so that they can be adapted to future needs. From the ground floor upwards, the building was constructed using timber elements.

    The energy supply is consistently based on renewable sources. The electricity for the approximately 400 residents comes from the PV systems on the roofs of the apartment blocks (700 MWh/year). Heat is generated in a heating centre using Swiss wood pellets.

    The mobility concept focuses on cycling, public transport, electric vehicles and car sharing. Bicycle stands, charging stations, repair and cleaning areas are available. Residents can also use one of the two electric cars from the neighbourhood’s own car-sharing scheme via an app or conveniently use the bus, which runs every half hour from the neighbourhood to Burgdorf. Demand for the condominiums and rental flats was very high right from the start. All 168 flats were sold or rented months before completion. The fair sales and rental prices certainly contributed to the great success, e.g. a flat with 4.5 rooms was already available from CHF 610,000 (minus Minergie subsidies from the Canton of Berne).

  • Abwärme von Fassaden wird zu Strom

    Abwärme von Fassaden wird zu Strom

    Die Frage, ob die Abwärme von Fassadenverkleidungen aus Nanomaterialien künftig zur Stromerzeugung genutzt werden kann, beschäftigt Forscher weltweit. Ein Team der TU Darmstadt hat nun einen vielversprechenden Ansatz vorgestellt, der dies ermöglichen könnte. Mithilfe von Nanokanälen und Salzlösungen gelingt es, auch Abwärme geringerer Temperaturen in elektrische Energie umzuwandeln.

    Die Energieumwandlung basiert auf einem Material mit mikroskopisch kleinen Kanälen, die eine hochkonzentrierte Salzlösung enthalten. Ein minimaler Temperaturunterschied zwischen den Seiten des Materials führt zu einem thermoelektrischen Effekt, der eine überraschend hohe elektrische Spannung erzeugt. Dieser Mechanismus könnte die effiziente Nutzung von Abwärme unter 100 Grad Celsius revolutionieren.

    Das Forschungsteam erklärt, dass die Stromerzeugung in den Nanokanälen und der Salzlösung auf der Bewegung von Ionen und der Bildung von ladungsneutralen Clustern basiert. Wenn ein Bereich des Materials erwärmt wird, zerfallen die Cluster und erzeugen Ladungen, die zur kälteren Seite wandern und dabei eine hohe elektrische Spannung erzeugen.

    Aktuell arbeiten die Forscher daran, ihr theoretisches Modell mit experimentellen Ergebnissen in Einklang zu bringen. Dazu kooperieren sie mit einem Team vom University College Cork, das die beschriebenen Phänomene experimentell untersucht. Obwohl die Technologie noch nicht marktreif ist, sind die Forscher optimistisch und sehen ein grosses Potenzial für zukünftige Anwendungen. Eine mögliche Anwendung könnte eine Fassadenverkleidung aus speziellem Nanomaterial sein, die einen Teil der Abwärme eines Gebäudes in elektrischen Strom umwandeln kann.

    Obwohl die Entwicklung noch in den Anfängen steht, halten die Forscher die Verfolgung dieser Vision für entscheidend. Angesichts der Energieverschwendung durch ungenutzte Abwärme in Industrie und Haushalten ist die Suche nach effizienten Lösungen dringend geboten.

  • Canton of Bern favours solar energy along its roads

    Canton of Bern favours solar energy along its roads

    Two consortia from the cantons of Zurich and Basel were selected from among the applicants, which impressed with their expertise and innovative approaches. The awarding of the projects to the consortium of Elektrizitätswerke des Kantons Zürich (EKZ), Helion AG and mha gmbh as well as the consortium of Industrielle Werke Basel (IWB) and TNC Consulting AG (TNC) marks a decisive step towards promoting renewable energies in the region.

    In particular, the initiative of the EKZ-Helion-mha consortium to erect large-scale solar carports at cantonal motorway service stations represents a double innovation.

    In addition to producing clean energy, these carports help to reduce the use of air conditioning by providing shade. With a planned capacity of almost 8.5 megawatts, they are aiming to realise ten photovoltaic systems and are also exploring the possibility of installing solar panels on noise barriers, retaining walls and a bridge.

    The IWB-TNC consortium is focussing on the installation of almost 1.8 megawatts of photovoltaic systems in the Bernese Oberland region, distributed across various structures such as retaining walls and bridges. The feasibility of these projects is ensured by comprehensive studies.

    The first planning steps for these pioneering solar installations will begin in April 2024, underlining the canton’s commitment to the national Energy Strategy 2050 and to achieving the net-zero target by 2040. This selection process emphasises the Canton of Bern’s desire to take a leading role in the implementation of energy solutions and at the same time promotes the participation of local stakeholders in the energy transition.

  • Pioneering solar initiative in Glarus

    Pioneering solar initiative in Glarus

    The authorisation granted by the Glarus cantonal government under energy law enables Swisspearl AG to significantly expand its large-scale solar installation on the roofs of its production halls. With an impressive total output of 3100 kilowatts (kW), this system will not only be the largest of its kind in the canton, but will also be able to cover up to 50 per cent of the company’s electricity requirements. The decision to waive an annual levy of around CHF 30,000 is due to the innovative and exemplary nature of the project, which is considered to be pioneering for similar large-scale systems in the industry.

    The promotion of the photovoltaic system by waiving the fee reflects the endeavours of the canton and the company to be leaders in the use and expansion of renewable energy sources. This project not only represents a significant contribution to achieving the national energy targets, but also serves as an inspiring example for other companies to accelerate the transition to more sustainable energy sources.

    With the realisation of the photovoltaic plant, the canton of Glarus is reaffirming its commitment to a more environmentally friendly and sustainable future. Swisspearl AG demonstrates how companies can actively contribute to reducing their carbon footprint while increasing their energy efficiency. This initiative marks a decisive step forward in regional energy policy and sets new standards for the integration of renewable energies in industrial production.

    The approval of the photovoltaic plant in Niederurnen by the Glarus cantonal government represents a significant milestone in the pursuit of a more sustainable and energy-efficient economy. Swisspearl AG exemplifies the potential of industry to play a pioneering role in ecological change and emphasises the importance of innovative energy solutions for the regional and national economy.

  • EPFL researchers make electricity from glass panes

    EPFL researchers make electricity from glass panes

    Scientists at the Swiss Federal Institute of Technology Lausanne(EPFL) have developed an innovative way of producing photoconductive circuits. These are printed directly onto a glass surface using an ultra-fast femtosecond laser. This new technology is translucent and requires a single material. It could one day be used to generate energy, according to a press release from EPFL.

    What happens when tellurite glass is exposed to femtosecond laser light? This is the question that Gözden Torun from the Galatea Laboratory at EPFL, in collaboration with scientists from Tokyo Tech in Japan, was trying to answer in her dissertation when she made a discovery that could one day turn windows into light sensors made from a single material, according to the press release.

    By studying how atoms in tellurite glass rearrange themselves when exposed to fast pulses of high-energy femtosecond laser light, scientists discovered the formation of nanoscale crystals of tellurium and tellurium oxide, two semiconductor materials, etched into the glass exactly where the glass had been exposed. An important discovery, a semiconductor material exposed to daylight can generate electricity.

    “Since tellurium is a semiconductor, we wondered whether it was possible to print permanent patterns on the surface of tellurite glass that could reliably induce electricity when exposed to light, and it turned out that yes,” Yves Bellouard, director of the Galatea laboratory at EPFL, is quoted as saying. “An interesting aspect of this technique is that no additional materials are needed in this process. All you need is tellurite glass and a femtosecond laser to produce an active photoconductive material.”

  • Kriens electricity suppliers realise heating network

    Kriens electricity suppliers realise heating network

    The two electricity suppliers to the town of Kriens, Energie Wasser Luzern(ewl) and Centralschweizerische Kraftwerke(CKW), are also becoming heating suppliers: according to a press release, the Kriens town council has decided in favour of the Kriens heating network consortium with ewl and CKW following a public tender for the construction and planning of a heating network.

    The heating network will help to supply additional properties in Kriens, namely the Obernau, centre and Kupferhammer-Kehrhof areas, with thermal energy. According to the city council, this is in line with the goals of the city’s climate strategy to achieve net-zero greenhouse gas emissions from buildings by 2045.

    According to the information provided, the winning project assures Kriens a high level of territorial coverage and provides for transitional solutions that guarantee the population a high degree of planning security for the changeover in their heat supply. CKW and ewl are planning their project with a broad mix of different renewable energy sources, including regional wood. According to City Councillor Maurus Frey, this will create an attractive offer “so that together we can take a step towards our climate targets”.

    In the upcoming construction work in Hergiswaldstrasse, the renovation work is to be carried out at the same time as the pipeline construction for the heating network, if possible. The city and ARGE intend to announce further details once the legally prescribed deadlines have expired.

  • AMAG commissions second solar plant in Zuchwil

    AMAG commissions second solar plant in Zuchwil

    In mid-December, the AMAG Group commissioned a photovoltaic system with a peak output of 153 kilowatts at its site in Zuchwil, the Group, which is primarily active in the automotive trade, announced in a press release. By 2025, AMAG plans to equip around 75,000 square metres of space on AMAG premises with solar panels. This would enable the Group to cover over a fifth of its electricity requirements from its own production.

    The 369 solar panels now installed in Zuchwil are already the Group’s second system at the Solothurn site. A similarly large system had already been put into operation at the end of June. “Our first photovoltaic system has already proved very successful and fulfils our expectations,” said Raphael Biberstein, Managing Director of AMAG Solothurn, in the press release. “It fills us with pride to be able to generate the electricity we need ourselves with these two systems.”

    The AMAG Group has already installed further photovoltaic systems in Basel, Wettswil ZH, Lupfig AG, Chur, Baden AG, EtoyVD, Oftringen AG, Buchrain LU, Winterthur, Maienfeld GR, Cham, Noville VD, La Tour-de-Trême FR, Châtelaine GE, Lengwil TG and Lugano. They cover a total area of around 34,000 square metres.

  • tb.glarus connects the largest solar community in Glarus to the grid

    tb.glarus connects the largest solar community in Glarus to the grid

    tb.glarus is also enabling tenants to participate in the expansion of solar energy. As the Glarus-based utility announced, it commissioned the system at the Stampfrüti stable on 23 November. This is the company’s sixth solar community and the largest to date in the canton of Glarus.

    With an area of 707 square metres, the system is expected to generate 128,000 kilowatt hours of electricity per year. According to tb.glarus, 95 per cent of the 707 solar panels have already been sold. The one-off investment in the Stampfrüti plant offers tb.glarus customers a fixed credit for solar power over 20 years.

    The six solar communities have a total output of 519 kilowatt peak and generate around 490,000 kilowatt hours per year on an area of over 2500 square metres. tb.glarus is looking for further roof areas that are suitable for solar communities.

  • ABB invests 500 million euros in electrification

    ABB invests 500 million euros in electrification

    ABB and the European Investment Bank(EIB) have signed a financing agreement for a loan totalling 500 million euros, ABB announced in a press release. The Zurich-based technology company intends to use the funds to develop semiconductor-based circuit breakers, environmentally friendly switchgear and technologies to improve efficiency and automation in buildings. The funds will be channelled into corresponding research by ABB in Switzerland, Germany, Italy, the Czech Republic, Finland, Norway, Poland and other European countries.

    “Electrification is crucial in the fight against climate change,” EIB Vice-President Ambroise Fayolle is quoted as saying in the press release. “With our loan to ABB, we are supporting a company with a long history of developing electrical products and a strong commitment to promoting practical solutions that make the European economy greener.”

    The new power distribution solutions are intended for use in functional buildings, industrial operations and microgrids, for example. The development and commercialisation of technologies is a high priority in ABB’s growth strategy. Last year, the company invested around 1.67 billion dollars, or around 4 per cent of its consolidated sales, in research and development.

  • BKW makes the start house on the Matterhorn energy self-sufficient

    BKW makes the start house on the Matterhorn energy self-sufficient

    This year’s Ski World Cup season starts on the weekends of 11/12 and 18/19 November with cross-border races in Zermatt and Cervinia. According to a press release, BKW has erected a mobile start house on the Theodul Glacier above Zermatt that does not require an external power supply.

    The starting house measures 15 by 8 metres and is inflatable. It weighs 600 kilograms and is designed to withstand wind speeds of up to 200 kilometres per hour. Power is supplied by 40 integrated solar cells with a total output of 11 kilowatts peak.

    The system was installed by companies from the Bern-based energy service provider’s network. These included BKW Engingeering for the project management, ingenhoven architects based in Düsseldorf for the building planning and enerpeak based in Dübendorf for the electrics and photovoltaics.

    BKW is an official premium and sustainability partner of the event organiser Swiss-Ski. “We are using the partnership with Swiss-Ski to bring sustainable solutions to snow sports,” said Michael Morgenthaler, Head of Brand Experience, Partnerships & Campaigns at BKW, in the press release. “At the same time, we can show the public our broad expertise in the areas of energy, buildings and infrastructure.”

  • Bergeller Bevölkerung befürwortet vorzeitige Erneuerung der ewz-Konzession

    Bergeller Bevölkerung befürwortet vorzeitige Erneuerung der ewz-Konzession

    Die Konzession von ewz zur Nutzung der Wasserkraft im Bergell ist noch bis Ende 2039 gültig. Seit einigen Jahren verhandelt ewz mit der Gemeinde Bregaglia über eine vorzeitige Rekonzessionierung, mit dem Ziel, diese im Jahr 2026 zu erteilen, um sie ab 2035 in Kraft treten zu lassen. In der konsultativen Gemeindeabstimmung vom 26. Oktober 2023 wurde dieses gemeinsame Vorhaben von der Bergeller Bevölkerung bestätigt.

    Stadtrat Michael Baumer, Vorsteher des Departements der Industriellen Betriebe, zu dem auch ewz gehört, äußerte sich erfreut über dieses Signal und betonte die langjährige Partnerschaft zwischen dem Bergell und der Stadt Zürich.

    Die Gemeinde Bregaglia und der Kanton führen derzeit Abklärungen im Hinblick auf den Heimfall und die Konzessionierung durch. ewz steht bereit, diese Bemühungen zu unterstützen und konkrete Verhandlungen aufzunehmen, um das Verfahren bis Ende 2026 abzuschließen.

    Die Vorbereitungen für die vorzeitige Rekonzessionierung laufen bereits seit 2014, einschließlich der Erstellung einer Schutz- und Nutzungsplanung in Zusammenarbeit mit einer Begleitgruppe. Für ewz ist eine optimierte Energieproduktion bei gleichzeitigem Schutz der Gewässer von großer Bedeutung.

    Seit 1959 produziert das Unternehmen Strom im Bergell und betreibt fünf Wasserkraftwerke sowie den Stausee Albigna. Diese Anlagen erzeugen jährlich etwa 440 GWh Strom, was dem Durchschnittsverbrauch von rund 168.000 Vierzimmer-Haushalten entspricht. Eine vorzeitige Rekonzessionierung würde die Arbeitsplätze sichern und ermöglichte es, sein Engagement im Bergell fortzusetzen, einschließlich Elektroladestationen und einer hochalpinen PV-Anlage auf der Albigna-Staumauer.

    Sie investiert in erneuerbare Energien, wo die natürlichen Ressourcen optimal genutzt werden können und die wirtschaftlichen, umweltverträglichen und akzeptablen Anforderungen erfüllt sind. Die Rekonzessionierung bestehender Wasserkraftanlagen spielt eine wichtige Rolle bei der Förderung dieser erneuerbaren Energiequelle in der Schweiz.

  • Trunz nimmt Solaranlage auf seinem Dach in Betrieb

    Trunz nimmt Solaranlage auf seinem Dach in Betrieb

    Die Trunz Holding AG hat am 18. Oktober ihre neue Solaranlage auf dem Dach des Trunz Technologie Centers in Steinach in Betrieb genommen. Ihre 2660 Photovoltaikmodule haben laut einer Mitteilung insgesamt eine Fläche von 8000 Quadratmetern. Die Module bestehen aus bifacialen Zellen und sind damit auch für die Stromproduktion bei diffusem Licht geeignet.

    Die Anlage hat eine Leistung von 1,1 Megawatt peak und soll pro Jahr 1,1 Millionen Kilowattstunden Strom erzeugen. Davon sind 750‘000 Kilowattstunden für den Eigenverbrauch vorgesehen. Das entspricht rund einem Drittel des Stromverbrauchs von Trunz in Steinach. Der übrige Strom wird in das Netz der Elektra Steinach eingespeist. Die Anlage wurde von Solar21 mit Sitz in Zürich installiert.

    An der Einweihung der Anlage haben auch die St.Galler FDP-Nationalrätin Susanne Vincenz-Stauffacher und der Mitte-Ständerat Benedikt Würth teilgenommen.

  • Consortium brings solar folding roofs to motorway rest areas

    Consortium brings solar folding roofs to motorway rest areas

    The electricity producer Aventron from Münchenstein, BG Ingenieure und Berater from Lausanne, Cargo sous terrain(CST) from Basel and dhp technology from Zizers have founded the consortium ABCD-Horizon to install photovoltaic systems along motorways.

    According to a media release, innovative photovoltaic systems will generate electricity at 45 motorway rest areas “in French-speaking Switzerland and the cantons of Valais and Bern”. This electricity will primarily be used for charging infrastructure along the motorways. The total output of the systems is said to be up to 35 megawatts. This amount could supply around 7800 households with an average annual electricity consumption of 4500 kilowatt hours.

    The impetus for solar power production on unused areas of motorway service areas and noise barriers came from the Federal Roads Office(FEDRO), according to the press release. In a national tender, the Horizon folding solar roof from dhb Technology was awarded the contract for all motorway service stations in the French-speaking region of Switzerland and in the cantons of Valais and Bern.

    The energy generated will reportedly be stored in existing charging points and batteries. The buyers of the surplus electricity are Aventron’s three main shareholders: Primeo Energie, Stadtwerke Winterthur and ewb, as well as CST, which also belongs to ABCD-Horizon.

    According to the company, the Horizon folding solar roof is characterised by “an aesthetic lightweight construction with a rope-based support structure concept and a patented folding mechanism”. This allows for wide column spacing and great heights of up to 6 metres above the ground. It also has a weather algorithm so that energy can be generated even in winter. The construction phase is planned from 2024 to 2027.

  • Implenia acquires stake in Norwegian wind power producer

    Implenia acquires stake in Norwegian wind power producer

    Construction and real estate company Implenia has signed an investment and shareholder agreement with wind power producer WindWorks Jelsa, based in Jelsa in Norway. Implenia and NorSea each hold a 41 per cent stake in WindWorks Jelsa as minority shareholders, according to a media release.

    The aim of the agreement is to develop a state-of-the-art facility for the production and assembly of large concrete and steel structures for floating wind turbines in the lakeside village of Jelsa. In addition to a production and assembly area of 800,000 square metres, warehouses, workshops and specially developed launching facilities and heavy-duty quays are to be built by 2032. Implenia is to contribute its experience in site design and planning, strategy and market development.

    For Norway, wind energy generated on the high seas is of great importance as a future source of energy and as an export commodity. Wind power is also “expected to become the most important form of energy” throughout Europe. WindWorks Jelsa wants to build floating wind turbines with a total capacity of 1 gigawatt per year. This capacity can cover the annual electricity consumption of up to 4 million households.

    With its commitment, Implenia aims to become a major player in this fast-growing market. “Floating offshore wind farms are an interesting new area in which Implenia can profitably apply its many years of experience and extensive expertise,” Christian Späth, Head Division Civil Engineering at Implenia, is quoted as saying in the media release. Implenia has committed to making two small investment tranches in 2023 and 2024.

  • AMAG commissions second photovoltaic plant in Cham

    AMAG commissions second photovoltaic plant in Cham

    AMAG has connected the second solar plant on the roof of its own car park at Alte Steinhauserstrasse 5 in Cham to the local power grid. According to a media release from the car dealer, over 786 solar modules were installed on an area of 1599 square metres. This could generate 320,000 kilowatt hours of electricity annually.

    The public car park is operated by AMAG Parking AG. With the activation of the facility, the AMAG Group is continuing to work on the implementation of its sustainability and climate strategy. In June 2023, the car dealer had commissioned a photovoltaic roof system at AMAG Zug. As there, the electricity is intended to cover AMAG’s own needs. Any excess production is to be fed into the public power grid.

    By 2025, 75,000 square metres of the roofs of AMAG plants are to be equipped with solar panels. The AMAG Group has gradually expanded its solar capacities in recent years. This has resulted in the installation of corresponding systems on the roofs of numerous plants.

  • Project partners present alpine solar project ScuolSolar

    Project partners present alpine solar project ScuolSolar

    The project partners for the alpine photovoltaic system in the Scuol Motta Naluns ski area want to take advantage of the opportunities arising from the Solar Express initiated by the federal government. For this reason, the municipality of Scuol and its civic community, together with EE Energia Eng iadina and Engadiner Kraftwerke AG from Zernez, are presenting their plans for the area surrounding these ski area facilities, more precisely in the Salaniva area. The public information event took place on 25 July.

    The plant is to be used in particular for the production of renewable winter electricity. According to a media release, existing infrastructure will be used to a large extent for the transmission of the energy. Grazing on the land will continue to be possible.

    The project partners have developed their plan within the framework of a project planning company in which all parties have a one-third share. According to the information provided, this shareholding and participation relationship will also apply to the further planning steps. Ultimately, ScuolSolar AG is to be formed. After the necessary approval of the population, the partners want to further develop “this important pioneering project for the Lower Engadine” with experts, then implement and finally operate it.

  • Energie 360° wants to store summer electricity underground with methane

    Energie 360° wants to store summer electricity underground with methane

    In a new study, the energy service provider Energie 360° has highlighted geo-methanisation as a way to store surplus electricity in summer for use when there is a shortage of electricity in winter. According to a media release, the study, conducted together with the energy storage company RAG Austria AG in Vienna, focuses on the economic use of this method.

    In geo-methanisation, surplus renewable energy, such as solar power, is converted into hydrogen (H2) in summer. This is injected into a natural underground reservoir together with CO2, which comes from biogas plants, for example. At a depth of more than 1000 metres, microorganisms combine hydrogen and carbon to form methane gas (CH4). In winter, when the demand for electricity and heat is high, the renewable gas can be stored and used in a variety of ways, according to the technical explanation in the press release.

    The University of Bern, the Swiss Federal Laboratories for Materials Testing and Research (Empa) and the OST – Ostschweizer Fachhochschule (University of Applied Sciences of Eastern Switzerland) collaborated on the Underground Sun Conversion – Flexible Storage (USC-FlexStore) research project by Energie 360° and RAG Austria. The joint study shows that implementation is possible and economically interesting if existing gas storage facilities are used. These exist in Switzerland’s neighbouring countries, such as Pilsbach in Austria.

    “The potential is enormous: annually, renewable energy of several terawatt hours can be stored seasonally with this method. This will substantially alleviate the winter electricity shortfall in Switzerland,” Jörg Wild, CEO of Energie 360°, is quoted as saying. The prerequisite is that Switzerland concludes binding regulations with its neighbouring countries for the purchase of renewable gases.

  • Lista puts photovoltaic system into operation

    Lista puts photovoltaic system into operation

    With an area of 15,000 square metres, Lista AG ‘s new photovoltaic plant is the largest in the canton of Thurgau, according to a media release. A total of 4600 modules on the roofs of the company’s production halls will produce 2 gigawatt hours of electricity annually. This is to cover one third of the company’s own needs. In addition, the supplier of operating and storage facilities will also feed 800,000 kilowatt hours into the grid.

    Lista AG has set itself the goal of achieving net zero CO2 emissions by 2025. On the one hand, the new photovoltaic system contributes to this. And on the other hand, the company from the St.Gallen-Lake Constance area is continuously optimising its energy efficiency. To this end, modern production lines and compressors are being installed. But the use of LED lighting technology also contributes to achieving the goal. Lista thus shows that “ecological responsibility and economic success can be reconciled”, according to the press release.

  • AMAG now also produces solar power in Zuchwil

    AMAG now also produces solar power in Zuchwil

    AMAG Zuchwil/Solothurn has installed and commissioned a photovoltaic system on the roof of the VW and Škoda building. On an area of 726 square metres, 367 solar panels are to produce 155,978 kilowatt hours of energy per year. With the same performance data, the garage expects to have a second system installed on the roof of its Audi and Seat building by the end of the year.

    “The fact that we are now also one of the AMAG businesses that can produce our own electricity with a photovoltaic system not only makes us proud, but also more sustainable and independent,” AMAG Solothurn’s managing director Raphael Biberstein is quoted as saying in a media release. “We need the electricity primarily for customer vehicles and for our own fleet.”

    By 2025, around 75,000 square metres of AMAG’s roof surface will reportedly be equipped with solar modules. This is roughly equivalent to the area of ten football pitches. This means that the car dealer will produce more than 20 per cent of its current electricity consumption itself.