Category: Sustainability

  • Timber as a key building material for the development of urban areas

    Timber as a key building material for the development of urban areas

    Efficient use of energy and climate protection in buildings
    In view of the high energy consumption of buildings and their contribution to CO2 emissions, it is crucial to reduce energy requirements both during the construction phase and during the use of buildings. Thanks to its CO2-storing nature and efficient production methods, timber construction makes a significant contribution to reducing so-called grey energy.

    Modernisation and renovation of the building structure
    Many buildings in Germany are over 25 years old and need to be modernised and renovated in terms of energy efficiency. Timber construction offers innovative solutions here, such as adding storeys for efficient space utilisation and redensification, combined with an improved energy balance. Increasing urbanisation and rural exodus require intelligent building concepts in cities.

    Urbanisation and the role of timber construction
    Timber construction is proving to be the ideal solution for vertical and horizontal redensification. Thanks to its low weight and high degree of prefabrication, timber construction is particularly suitable for use in densely built-up metropolises.

    Timber construction is more than just a traditional construction method – it is an answer to the pressing questions of our time regarding climate protection and sustainability. Similar to concrete and steel at the beginning of the 20th century, timber construction has the potential to solve future construction tasks efficiently and sustainably and thus contribute to a more sustainable design of our urban landscapes.

  • Hybrid construction methods using wood, concrete and steel

    Hybrid construction methods using wood, concrete and steel

    Integration and connection technologies
    A significant challenge in hybrid constructions lies in the integration of different materials. When joining wood and concrete, special fasteners must be used to take into account the different properties of the materials, such as the moisture sensitivity of wood.

    Developing an understanding of mixed-structure components
    Hybrid components combine two or more materials that are carefully selected for their specific properties. An example of this is the combination of concrete, which can absorb compressive forces, and steel, which is responsible for tensile forces. This combination results in innovative constructions that could not be realised with the individual materials alone.

    Applications in the field of prefabricated components
    In the field of prefabricated construction, hybrid construction methods are used in particular for the production of large and heavy components. Here, the components are first manufactured separately and later joined together to form a complete unit. This approach enables a more flexible design and simplifies transport and assembly.

    Revolutionary combinations for ceilings
    Innovative ceiling constructions with a sandwich cross-section use hybrid technologies to produce robust yet lightweight components. This advanced technology allows the integration of installation systems and contributes to the energy efficiency of the building.

    Combining wood and concrete
    The combination of wood and concrete in ceiling structures offers the opportunity to combine the strengths of both materials and compensate for their weaknesses. Wood can take on the load-bearing role, while concrete is used for sound insulation and the integration of heating or cooling systems.

    Innovative advances in the future
    The further development of hybrid construction methods strives to enable more efficient, more cost-effective and more environmentally friendly construction techniques. This includes improved manufacturing processes, increasing load-bearing capacity and speeding up the construction process. Overall, hybrid construction represents a forward-thinking approach to construction that combines the benefits of different materials to create efficient, sustainable and aesthetically pleasing structures.

  • Focus on sustainability: company achieves Gold status

    Focus on sustainability: company achieves Gold status

    Implenia, headquartered in Opfikon, has repeatedly been awarded Gold status by EcoVadis. EcoVadis is a global provider of sustainability ratings that was founded in Paris in 2007. Implenia improved its score from 70 points in the previous year to 75 points. “We are extremely pleased that we have been able to maintain our Gold status despite EcoVadis’ stricter assessment criteria,” said Anita Eckardt, Chair of Implenia’s Sustainability Committee, in a press release. “Many of our public and private customers look for a good EcoVadis rating when awarding projects. And investors are also attaching more and more importance to sustainability ratings.”

    During the assessment period, Implenia introduced a code of conduct and made a binding commitment to human rights and to diversity, equality and inclusion (DEI). This and efforts in the areas of labour law and human resources led to a better rating than in the previous year, according to the press release. Implenia has set itself twelve “ambitious sustainability goals” for the period up to 2025.

    Companies are assessed by EcoVadis according to the aspects of environment, labour & human rights, ethics and sustainable procurement. The highest award is the Platinum Medal. The awards recognise the social and environmental performance of the companies that have undergone an assessment. According to the press release, EcoVadis is “the world’s largest provider of sustainability ratings with more than 130,000 rated companies from over 180 countries”.

  • Green open space on the Papierwerd site in Zurich

    Green open space on the Papierwerd site in Zurich

    A versatile open space has been created on the small square between the Globus Provisorium and the Mühlesteg. This green space invites you to linger with various seating elements and a view of the Limmat. New trees provide shade and pleasant places to sit on sunny days. For this new open space, existing car parks on the forecourt of the Globus Provisorium were removed, the ground unsealed and an innovative green concept established. Temporarily placed trees in so-called “airpots” already provide shade and cooling today and can also be replanted later, which makes the new greenery doubly useful.

    Development direction and further measures
    This milestone is part of the development direction adopted by the city council for the Papierwerd site (STRB No. 2722/2023). The development direction is based on the “Forum Papierwerd” strategy process and dialogue procedure. The desire for open space was set out in the eleven key statements for the Papierwerd site.

    Further immediate measures are planned for 2025. At the same time, as part of the ongoing in-depth phase, the structural clarifications regarding the Globus provisional building will be further advanced, the handling of the conservation value and water protection will be discussed and a rough utilisation and operating concept will be developed.

    Integration into the HB/Central masterplan
    The development of the Papierwerd site is being closely coordinated with the overarching “HB/Central masterplan” and will be incorporated into it. Consistent findings from both plans, such as the expansion of the open space, the improvement of the quality of stay, access to the Limmat and heat reduction, will be pursued further. With the masterplan, the City of Zurich is developing a vision for the future of the HB/Central area with a time horizon up to 2050 for transport and urban planning in this area. Interested parties are invited to visit the Papierwerd site in person and discover the qualities of the newly created place to stay in the heart of the city. Further information on the history and development of the site can be found on site or on the city’s project website.

  • Ein nachhaltiger Holz-Hybrid Bau mit einem «Herz aus Holz»

    Ein nachhaltiger Holz-Hybrid Bau mit einem «Herz aus Holz»

    «Ein Herz aus Holz»
    Das Projekt wird als fünfgeschossiger Sockelbau und einem Hochhaus mit einem Atrium – dem «Herz aus Holz» – realisiert. Auf den Dachflächen wie auch auf Teilbereichen der Fassade sind Photovoltaik-Module für die Stromproduktion vorgesehen. Die gesamte Wärme- und Kälteversorgung erfolgt mittels eines Anschlusses an die Fernwärme «Wärmeverbund Seetalplatz». Das Projekt strebt die Zertifizierung mit den Nachhaltigkeitslabeln SNBS Gold und Minergie-P-ECO an. Für den Holz-Hybridbau und die vorgefertigten Fassadenelemente werden ca. 1420 m3 Holz verarbeitet – v.a. Fichte und Tanne. Der Holzbau trägt dabei nicht nur zum angenehmen Innenklima bei, sondern reduziert auch die CO2-Bilanz der Erstellung des Gebäudes. Die fixfertige Vorfabrikation der Fassadenelemente aus Holz in geschützten Werkhallen stellt zudem die Qualität sicher und ermöglicht eine schnellere Fertigstellung der Gebäudehülle.

    Der Kanton Luzern verfolgt eine Vorreiterrolle bei der Umsetzung der Klimaziele, wie auch Losinger Marazzi. Die Immobilienentwicklerin und Totalunternehmung hat sich zum Ziel gesetzt, ihre CO2-Emmissionen bis ins Jahr 2030 um 30 % im Vergleich zu 2021 zu reduzieren. Dieses Ziel erreicht Losinger Marazzi indem neben einem verstärkten Fokus auf Holzbau- sowie Stadterneuerungsprojekte die Nachhaltigkeit in allen Projekten als zentrales Thema behandelt wird.

    Heute ist die kantonale Verwaltung auf über 30 verschiedenen Standorten verteilt. Durch den Neubau werden im Jahr 2026 rund 1500 Angestellte unter einem Dach zusammengeführt und somit eine zentrale Anlauf-, Auskunfts- und Beratungsstelle im neuen Stadtteil Luzern Nord erschaffen, die mit allen Verkehrsmitteln bestens erschlossen ist. Zudem werden sich in den unteren Geschossen des Gebäudekomplexes die öffentlichkeitswirksamen Dienststellen, ein Polizeiposten, Gastronomie und Läden verteilen. Eine Kita im 6. OG sowie Wohnungen in den obersten Geschossen werden zum belebenden Nutzungsmix beitragen.

  • Vaud plans electricity autonomy by 2035

    Vaud plans electricity autonomy by 2035

    The study presented by Isabelle Moret, Head of the Department of Economy, Innovation, Employment and Heritage (DEIEP), shows encouraging results on the photovoltaic potential of the roofs and façades of Vaud cantonal buildings. In the presence of Pierre de Almeida, Director General of Real Estate and Heritage, and Camille Orthlieb, Head of Sustainable Construction at the DGIP, it became clear that the cantonal administration can achieve electrical autonomy by 2035 by producing the equivalent of 23 GWh of electricity annually.

    Comprehensive photovoltaic installation
    Since the early 2000s, almost 19,800 m² of solar panels have been installed on the roofs of the cantonal administration’s buildings. This area is to be increased to around 100,000 m² by 2035. All new buildings will be equipped with photovoltaic systems so that they produce as much or even more energy than they consume. At the same time, a building refurbishment programme aims to reduce electricity consumption by around 30 % through energy optimisation.

    Responsibility and leading by example
    Isabelle Moret emphasises the importance of these measures: “Thanks to the efforts of our teams for the massive expansion of photovoltaic systems, we should achieve electrical autonomy by 2035. The Vaudois state is thus demonstrating its responsibility towards the challenges of sustainability and serving as a role model for energy consumption in the property sector.”

    Financing and project coordination
    Over CHF 18 million will be made available for the implementation of this project in order to finance both the expansion of the solar installations and the reduction in electricity consumption. Implementation requires close collaboration between the Directorate-General for Property and Cultural Heritage (DGIP), the Department for the Preservation of Historical Monuments, the Directorate for Energy (DGE-DIREN) and the Directorate for Resources and Natural Heritage (DGE-DIRNA).

    Future prospects
    In addition to the cantonal administration, the University of Lausanne (UNIL) and the Lausanne University Hospital (CHUV) are also evaluating their photovoltaic potential in order to increase their energy independence. These measures emphasise the canton of Vaud’s commitment to driving forward the energy transition and achieving long-term sustainability goals.

  • Stable economic development in Vaud

    Stable economic development in Vaud

    In 2023, the Vaud Economic Development Agency provided financial support for 733 business projects. Support for internationalisation increased by almost 20%, while support for the cleantech sector rose by 23.7%, reflecting the growing importance of innovation in the energy and climate sector. The number of branches of foreign companies remained stable at 28 new branches.

    Network and partnerships
    Isabelle Moret, Head of the Department of Economy, Innovation, Employment and Heritage (DEIEP), emphasises the importance of a strong network: “In 2023, more than a thousand companies and project promoters benefited from the Vaud government’s support measures, particularly in the areas of innovation and sustainability.” These measures supported 3722 jobs.

    Strong growth in the medtech sector
    Vaud start-ups raised CHF 444 million, with 29 of them among the top 100 best start-ups in Switzerland. The medtech sector is particularly noteworthy: 52% of investments in medical technology across Switzerland were channelled into Vaud start-ups.

    Attracting foreign companies
    Innovaud, the agency for the promotion of innovation and foreign investment, supported the establishment of 28 new companies in the canton of Vaud. The life sciences sector had a particularly strong presence, accounting for more than a third of the new companies.

    Promotion of research and development
    The innovation parks in the canton of Vaud were home to a total of 661 companies and 8326 jobs at the end of 2023. The new unlimitrust campus and the expansion of the EPFL Innovation Park with the Ecotope project are examples of growth and support for research and development.

    Support from the Innovation Promotion Fund
    The Innovation Promotion Fund was endowed with an additional CHF 50 million in 2023. This fund supports the Foundation for Technological Innovation (FIT) and various programmes such as Tech4Trust, Trust Valley’s leading acceleration programme for start-ups, and FIT Impact for young projects in the field of impact entrepreneurship.

    Sustainability as a central task
    Sustainability plays a central role in the 2022-2027 legislative planning. The “4-season tourism” framework credit of CHF 50 million aims to improve the quality and sustainability of tourism infrastructure. in 2023, 84 projects totalling almost CHF 4 million were supported to help companies make the transition to sustainability.

    A strong economic ecosystem
    The PESI also supported organisations such as Innovaud, which accompanied 328 companies and contributed to the creation of 31 new companies. Genilem, specialised in project diagnostics and entrepreneurship consulting, supported 24 companies. The Foundation for Technological Innovation (FIT) awarded over CHF 4 million in grants and loans to start-ups.

    Regional economic promotion and territorial advertising
    The regional economic promotion offices supported 712 companies and provided over 1,000 services. Vaud Promotion encouraged 165 local producers to label their products with the VAUD CERTIFIES D’ICI label. The attractiveness for tourists increased by 8.6%, with most visitors coming from Switzerland, France and the USA.

    These comprehensive measures and partnerships emphasise the successful strategy of the Vaud Economic Development Agency, which focuses on sustainability, innovation and strong networks.

  • Construction of a met mast for wind measurement and environmental monitoring started

    Construction of a met mast for wind measurement and environmental monitoring started

    According to a press release,CKW began construction of a measuring mast on the Ruswilerberg on 13 May. The mast carries anemometers at 60, 80 and 100 metres that measure the wind. At heights of 60 and 100 metres, ultrasonic sensors measure the sounds of bats flying by. At the top, sensors measure temperatures and humidity.

    The measurements are collected for at least one year. They are intended to help check the existing wind and weather data and thus ensure the economic viability of the planned wind farm. At the same time, they should help to minimise the impact on humans, animals and the environment.

    CKW is planning a wind farm with five turbines on the Ruswilerberg.

  • Mast measures wind data for Grotwind wind farm

    Mast measures wind data for Grotwind wind farm

    Planning for the Grotwind wind farm is entering the next phase. A measuring mast is currently being erected on the Grot in the municipality of Pfäfers. According to a press release, this is equipped with anemometers and weather sensors at heights of 57, 69 and 80 metres. These will continuously record wind and weather data such as wind strength and direction, turbulence, humidity and air pressure for twelve months. Ultrasonic sensors will also be installed at 69 metres to record the sounds of passing bats.

    The data will help to define the appropriate wind turbines, their number and their optimal placement. They will also help to determine site-specific shutdown algorithms. The aim is to minimise the impact of the planned wind farm on humans, animals and the environment.

    The wind farm is being planned by St.Gallisch-Appenzellische Kraftwerke, SN Energie and the specially founded Grotwind GmbH based in Quarten SG. It will produce electricity for 5000 households.

  • ETH researchers generate very high temperatures with new technology

    ETH researchers generate very high temperatures with new technology

    Researchers at the Swiss Federal Institute of Technology in Zurich(ETH) have developed a technology known as a thermal trap that absorbs sunlight and can thus achieve very high temperatures. According to a press release, they have succeeded in reaching temperatures of over a thousand degrees Celsius using this method. These high temperatures are required for the production of cement, metals and various chemicals in energy-intensive industrial processes. The team led by Emiliano Casati, a scientist in the Energy and Process Systems Engineering Group, and Aldo Steinfeld, Professor of Renewable Energy Sources, developed this system, the main component of which is a quartz rod. When this is irradiated with intense light, it is converted into heat with only minimal heat loss. Previous experiments of this kind with thermal traps reached a temperature of 170 degrees Celsius. Solar power plants usually operate at temperatures of up to 600 degrees Celsius.

    The researchers’ aim is to one day be able to use the method for the decarbonisation of energy-intensive industries. “To combat climate change, we need to decarbonise energy in general,” Emiliano Casati is quoted as saying in the press release. “People often think of energy only in terms of electricity, but we actually consume around half of our energy in the form of heat.” The current experimental study was published in the specialist journal “Device”. Further analyses, including on the economic viability of this technology, are being planned.

  • Innovative technology for utilising sunlight for high temperatures

    Innovative technology for utilising sunlight for high temperatures

    Researchers at the Swiss Federal Institute of Technology in Zurich(ETH) have developed a technology known as a thermal trap that absorbs sunlight and can thus achieve very high temperatures. According to a press release, they have succeeded in reaching temperatures of over a thousand degrees Celsius using this method. These high temperatures are required for the production of cement, metals and various chemicals in energy-intensive industrial processes. The team led by Emiliano Casati, a scientist in the Energy and Process Systems Engineering Group, and Aldo Steinfeld, Professor of Renewable Energy Sources, developed this system, the main component of which is a quartz rod. When this is irradiated with intense light, it is converted into heat with only minimal heat loss. Previous experiments of this kind with thermal traps reached a temperature of 170 degrees Celsius. Solar power plants usually operate at temperatures of up to 600 degrees Celsius.

    The researchers’ aim is to one day be able to use the method for the decarbonisation of energy-intensive industries. “To combat climate change, we need to decarbonise energy in general,” Emiliano Casati is quoted as saying in the press release. “People often think of energy only in terms of electricity, but we actually consume around half of our energy in the form of heat.” The current experimental study was published in the specialist journal “Device”. Further analyses, including on the economic viability of this technology, are being planned.

  • New calculation tool for circularity in construction presented

    New calculation tool for circularity in construction presented

    Conspark, a Zurich-based consultancy for sustainable construction, has developed a new calculation tool for circularity in the construction industry. According to a press release, the tool can be downloaded free of charge from the company’s website. Users can use the tool to calculate the circularity of their construction products. To do this, the information from the environmental product declaration must be entered in the corresponding categories. The tool then calculates the circularity for the manufacturing phase and the end of the product’s life, according to the press release.

    Buildings account for 50 per cent of energy consumption and 40 per cent of greenhouse gas emissions. They also consume a large proportion of primary raw materials and water. The goal of a functioning circular economy can therefore make a significant contribution to decarbonisation and sustainability in the construction industry.

    “With our calculation tool, users have the opportunity to carry out an initial analysis of their products in terms of their recyclability in line with our motto: measurement, transparency, credibility. The results help to identify potential for improvement,” Florian Robineck, Managing Director and founder of conspark, is quoted as saying in the press release.

  • Ground-breaking ceremony for carbon-free cement plant in Belgium

    Ground-breaking ceremony for carbon-free cement plant in Belgium

    Building materials producer Holcim, headquartered in Zug, has broken ground on a plant for the production of carbon-free cement in Belgium, according to a press release. The event in Obourg took place in the presence of Belgian Prime Minister Alexander De Croo and the EU Commissioner for Climate Action, Wopke Hoekstra.

    The modern GO4ZERO plant should be able to produce a total of 2 million tonnes of net zero cement per year by 2029. With a planned investment of over 500 million euros, the project aims to drive forward the decarbonisation of Europe, according to the press release. Holcim is collaborating on the project with Air Liquide, a Paris-based company specialising in gases for industry, medicine and environmental protection.

    Holcim is supporting the project with 230 million euros from the European Innovation Fund, which is financed by revenues from the EU Emissions Trading System. “The Innovation Fund is driving the introduction of innovative, low-carbon technologies in Europe,” Wopke Hoekstra is quoted as saying.

    “By driving decarbonisation as an engine for profitable growth, Holcim is well on its way to making net-zero cement and concrete a reality on a large scale in this decade,” says Miljan Gutovic, CEO of the Holcim Group. GO4ZERO is one of six projects supported by the European Union for the capture, utilisation and storage of carbon dioxide. “These aim to capture a total of over 5 million tonnes of CO2 per year so that we can offer over 8 million tonnes of fully decarbonised cement per year across Europe by 2030,” says Gutovic.

  • Pilot project to reduce energy consumption in building technology

    Pilot project to reduce energy consumption in building technology

    Artificial intelligence could help to reduce energy consumption in building technology. Hälg AG, which is based in the St.GallenBodenseeArea and is active in building technology, has launched a pilot project for the AI-based software technology R8 Digital Operator from the manufacturer R8 Technologies, according to a press release.

    The tests are intended to determine the energy-saving potential of the building control system at the company’s own facilities at its headquarters in St.Gallen. The software uses algorithms developed using AI, “which monitor and automatically optimise the needs of the different rooms in the building”.

    The manufacturer, headquartered in Estonia, promises efficient and sustainable controls for building technology systems. Compared to conventional building automation systems, according to the announcement, the adaptations “run simultaneously through intelligent, proactive and predictive control and ensure automatic optimisation of the building technology systems”.

    The test phase will extend over one to one and a half years and take into account data from all four seasons. This is how long it will take R8 to adjust. As soon as the results are available, Hälg will decide whether to continue working with R8 as the exclusive sales partner for the solution in Switzerland.

  • The path to sustainable metropolises

    The path to sustainable metropolises

    The discussion paper by ULI and BNP Paribas REIM presents outstanding international examples of urban transformations that have been implemented in metropolises such as Hamburg, Paris, Copenhagen and Bogotá. These cities have developed innovative concepts for transport networks, sustainable urban development and city networks to make their urban spaces more sustainable. The paper emphasises how these approaches contribute to greater urban resilience by integrating environmental, social and economic aspects.

    Strategies to promote urban resilience
    The ten paths to a resilient city described in the discussion paper offer concrete recommendations for action for public and private stakeholders. These range from the formulation of adaptation strategies and building awareness of crises to the integration of urban risk management into urban planning. Particular importance is attached to the creation of sufficient housing and social infrastructure in order to provide inclusive and sustainable social services that enable the broad participation of urban society.

    The role of the public and private sector
    The discussion paper emphasises that the transformation to resilient cities is a joint task that is not the sole responsibility of the public sector. Isabella Chacón Troidl and Honoré Achille Simo explain that property investors also play a decisive role in the development of resilient urban spaces. They help to integrate social, ecological and economic aspects into urban development and thus promote a comprehensive renewal of the housing sector.

    Conclusion and outlook
    The discussion paper “Urban transformation versus urban resilience” serves as a catalyst for a new era of urban planning. It calls on decision-makers and stakeholders to take innovative and sustainable measures that not only strengthen the resilience of cities, but also improve their quality of life. Sabine Georgi emphasises that the future development of urban spaces is a social issue that requires active and joint action in order to meet the challenges of the 21st century.

  • Innovation and networking in the Swiss electrical industry

    Innovation and networking in the Swiss electrical industry

    The newly launched ineltec 2024 offers a platform for over 140 exhibitors to showcase their latest products and services in the fields of electrical engineering, building automation, e-mobility and more across 11,000 square metres of exhibition space. The trade fair not only attracts a large number of experts, but also decision-makers from the entire industry who are looking for innovative solutions and sustainable technologies. The topics of e-mobility and smart building technologies are a particular focus, as these areas are expected to undergo decisive developments in the coming years.

    Interactive platforms for professional dialogue
    In addition to the traditional trade fair experience, ineltec reloaded also offers digital access via its content platform ineltec.ch, where exhibitors and visitors can network and gather information in advance. In addition, the two marketplaces with bistros and an interaction zone ensure a lively exchange and offer space for daily events such as innovation pitches and moderated discussions. These formats are designed to provide participants with new ideas and practical knowledge for their day-to-day work.

    Focus on young talent and networking
    Another focus of ineltec 2024 is the promotion of young talent and networking among industry participants. The events, such as the start-up pitches and after-work events, not only provide a platform for new ideas, but also offer valuable networking opportunities. The aim is to build a bridge between established companies and innovative start-ups and at the same time actively involve young talent in the industry.

    Future-oriented discussions and further training
    ineltec 2024 also places a strong focus on further training and discussions on key industry topics such as the integration of AI in building automation and the impact of ESG directives on electrical engineering. By participating in these round tables and presentations, trade visitors will gain valuable insights into the future development of the electrical industry and can thus prepare themselves for the challenges ahead.

    Ineltec 2024 promises to be an unmissable event for all electrical industry professionals, providing not only a showcase for technological innovations, but also a central platform for professional exchange and training.

  • A new vision for the Zurich metropolitan area

    A new vision for the Zurich metropolitan area

    The Metro-ROK 2050 initiative emphasises the need to use settlement areas sensibly and sustainably in order to improve the quality of life and maintain the ecological balance. By focussing on four central areas of action – urban landscape, transitional landscape, cultural landscape and natural landscape – the concept aims to promote balanced development. The protection of green spaces and high-quality internal development play a particularly important role. Environmentally friendly urban planning is to be realised by strictly limiting the expansion of settlements until 2040 and promoting transformation projects in existing buildings that take the circular economy principle into account.

    Innovative technologies and energy efficiency
    Another important aspect of the Metro-ROK 2050 is the integration of advanced technologies and ecological construction methods in order to improve the carbon footprint of the metropolitan area. The concept emphasises the importance of renewable energies and increasing energy efficiency in buildings in order to counteract the challenges of climate change. The avoidance of further soil sealing and the use of green spaces to combat heat in urban centres are also priority measures.

    Sustainable mobility as a key component
    The spatial planning concept also places a strong focus on promoting public transport and sustainable mobility solutions. The goal of increasing the share of public transport by 2050 and promoting environmentally friendly means of transport is crucial for reducing environmental pollution and increasing the quality of life in the region. Short journeys and low-emission means of transport should help to minimise the ecological footprint.

    Cooperation and future-oriented planning
    The Metro-ROK 2050 initiative reflects the commitment of the participating cantons and sets new standards in regional spatial planning. The updated concept, which was unanimously adopted by the Metropolitan Council on 3 November, serves as a trend-setting framework for the sustainable and future-proof development of the entire Zurich metropolitan area. By taking an integrated view of ecological, economic and social factors, the concept endeavours to shape the metropolitan area as a liveable and sustainable place.

  • Zug sets standards in global blockchain research

    Zug sets standards in global blockchain research

    With the support of the Canton of Zug, an interdisciplinary research centre is being established that will focus on the diverse applications and effects of blockchain technology. The initiative, which is being realised in cooperation with the University of Lucerne and Lucerne University of Applied Sciences and Arts, will not only research the technological aspects of blockchain, but also the social, economic and political aspects. Finance Director Heinz Tännler emphasises that the project not only promotes scientific research, but also strengthens Zug as a business location, particularly in light of the new OECD minimum taxation that was introduced at the beginning of 2024.

    Globally unique research initiative
    The newly founded Zug Institute for Blockchain Research at the University of Lucerne will focus on the challenges and opportunities of this disruptive technology. Nine new chairs will be created to address the various facets of blockchain technology. The research will pursue a holistic approach that encompasses technological innovations as well as the associated social, economic and political issues. The aim is to develop an in-depth understanding of blockchain technology and its potential impact on society.

    Strengthening research capacities at the Lucerne University of Applied Sciencesand Arts
    The Lucerne University of Applied Sciences and Arts will significantly expand its existing activities in blockchain research through the new initiative. The university is contributing its expertise in the fields of computer science, finance and technology to the project and is working closely with the University of Lucerne to create a comprehensive research environment. This cooperation forms the basis for the hub, a platform for collaboration and communication that promotes exchange between the participating researchers and the global blockchain community.


    Sustainable funding and long-term goals
    Following the initial start-up funding from the canton, it is planned that the project will switch to sustainable sources of funding. An external evaluation after three years will assess the effectiveness and progress of the research initiative. These measures will ensure that the “Blockchain Zug – Joint Research Initiative” becomes a permanent fixture in the global research landscape in the long term and establishes Zug as a leading centre for blockchain technology.

  • Influential voice in the property industry

    Influential voice in the property industry

    If you compare your figures from 2000 to 2024. What stands out?
    Prices have risen steadily both in the residential property sector and for apartment blocks with rental flats. The price of an average property of the same quality has more than doubled since 2000. On average across the country, an identical EEC has become 160 per cent more expensive, an EFH 120 per cent more expensive and an identical MFH 90 per cent more expensive. Home ownership corrected somewhat between 2014 and 2019 due to the introduction of “self-regulation” in mortgage lending in response to pressure. In some cases, however, the banks have put the brakes on themselves. In the case of yield-producing properties, the turnaround in interest rates from spring 2022 stands out, which had an impact on transaction prices, although the city of Zurich was little affected.

    What can you predict for the years 2030 and 2040?
    Both the UN and FSO population forecasts assume that Switzerland’s population will continue to grow. Due to the “number of heads”, it is to be expected that there will be a considerable additional demand for living space. In addition, socio-demographic changes are expected to lead to a further reduction in the size of households and thus to an increase in demand for housing. Demand is concentrated in the centres and agglomerations, with the latter becoming ever larger as the cities become “overcrowded”.

    What problems does the current property sector have?
    Switzerland generally only has luxury problems and the sector itself has few problems. People looking for housing will have difficulties because it cannot be provided where there is demand. On the one hand, this has to do with quantity and, on the other, with the speed of the processes, especially the authorisation processes. The result is that demand is displaced geographically and households with less purchasing power are at a disadvantage compared to those with the means to pay.

    Do you have any approaches to solving these problems?
    We economists assume that the shortage will cause rents and prices to rise. In the 1990s, when demand was weak and rents were falling, nobody called for regulation. For around two decades now, however, supply in the centres has lagged far behind demand and there is once again a major shortage. The alternatives for households are then smaller flats – if they can find one at all – or moving to urban centres where flats are still available.

    Have you changed the customer requirements for your company? How and why?
    No. We still have practically the same, mostly highly exciting, projects.

    How do you identify promising locations for property projects?
    It’s particularly about which promising industries are located where. For most sectors – or at least parts of them – the centres are preferred, so the demand for space in the centres is high. In addition, central locations are also very attractive for many households and proximity to the centre is preferred. Accordingly, the central question is how the agglomerations spread out in the area, which depends on building land reserves and densification potential and to a large extent on transport routes and journey times.

    What socio-demographic and economic indicators are decisive for your market and location analyses?
    We rely heavily on the demand segments that we have developed together with sotomo (residential) and CSL Immobilien (office, retail). It’s not just about the number of households or businesses, but also about their needs in terms of the location – in particular the quality of the micro-location – as well as the space or flats. In addition to the needs, the willingness to pay must also be taken into account.

    How do you assess the added value and development potential of complex properties?
    We use the DCF method for this, whereby the cash flows of planning, construction, letting or sale are localised on the time axis. Time is money; this must not be forgotten. It should also be noted that assumptions about the future are always made at the time of valuation. Expected values are therefore used and there is a risk that the expectations will not materialise. These risks must be taken into account in addition to the time conditions in the form of a safety margin.

    Is Switzerland being hit by the property bubble?
    The world has been flooded with money, although the flood has now been temporarily halted by the rise in interest rates. However, money is likely to remain cheap in the future due to the high debt burden and great general prosperity. In this respect, the developments on the property markets are logical. If there is a bubble, then it is a general capital market bubble.

    What else would have to happen for this to occur?
    We would speak of a bubble if prices decoupled from the fundamentals.

    Let’s go abroad. Prices in Germany have fallen. How is the property market in Germany and Austria doing? What do we have in common?
    Switzerland is in a very robust financial position and can also pursue an independent monetary policy. The Swiss National Bank demonstrated this on 16 March by cutting interest rates. This is a major difference to Germany and Austria, which are dependent on the decisions of the ECB. Another difference – at least compared to Germany – is that the mood in Switzerland is also poor due to the crises and wars, but not as miserable as in Germany. If you compare developments – e.g. property prices – over several cycles and crises, Switzerland is more cautious in both upward and downward movements than many foreign markets, which are correspondingly much more volatile.

  • The art of interior design – Zurich’s path to the future

    The art of interior design – Zurich’s path to the future

    You are the Director of Spatial Planning for the City of Zurich. Can you give us an overview of your responsibilities?
    Together with my staff, as director of the office I help plan the future of the city of Zurich. In order to make the most of the opportunities offered by a city in transition, we have specialist departments such as architecture and planning, including archaeology, monument preservation, the architectural history archive and a competence centre for geoinformation. The exchange gives us a very precise view of Zurich – from its prehistory to 2040.

    What are the goals of urban and spatial development in Zurich and what roles do you play in site and area development?
    We not only want to maintain the high quality of life in the city of Zurich, but also expand it. It should be able to improve selectively, both ecologically and socially sustainably. This requires suitable utilisation planning instruments – and we are in charge of developing and refining them.

    The municipal structure plan for settlement, landscape, public buildings and facilities is essential in this regard. We use it to specify which areas are suitable for building densification. We also designate areas for the provision of public open spaces as well as for communal public buildings and facilities – such as for primary schools or sports facilities. It is also an important coordination tool, as it shows how building density must be coordinated with transport and the supply of renewable energy, and it sets guidelines for other spatial aspects of environmentally and socially compatible urban development.

    What challenges does urban development face compared to other Swiss cities and what advantages does Zurich offer?
    Zurich shares many challenges with other cities in Switzerland and Europe. The focus is on growth and the associated demand for living space, whereby affordable housing in particular must be secured in the city. Demographic change and the pluralisation of lifestyles are leading to a variety of housing types and housing needs – which we need to address.

    In addition to socio-spatially compatible densification, the climate is a key issue. Around a quarter of all CO2 emissions come from the building sector. Urban planning and architecture today must be climate and environmentally friendly, conserve resources and preserve landscapes. In addition to climate protection, we need to curb heat island effects.
    What we no longer have, unlike other cities, are vacant industrial sites for conversion. Density reinforces the various interests in land and buildings in a city. In addition, as the economic engine of Switzerland, Zurich is under particular public scrutiny. Planning decisions require political discussion – participation is demanded. If there is no debate, a number of new buildings are appealed.

    What are the most important construction projects in Zurich and how do they contribute to the city and spatial development?
    I include planning in this. For example, the Josef site, the Schlachthof site, the Wollishofen lakeside and the Papierwerd site. They are important for Zurich’s urban development due to the previously mentioned shortage of space. This results in the challenging task of utilising these sites sustainably and efficiently in terms of planning.
    The city is also building itself – particularly affordable housing. The Leutschenbach and Tramdepot Hard housing estates alone will offer over 550 flats. In the case of Thurgauerstrasse or the Koch site, the city is allocating building land to non-profit housing developers.

    In connection with such large-scale projects, it is important to plan the associated social infrastructure. In particular, the provision of sufficient school space and cultural buildings such as the theatre and opera house are important for the city as a whole.
    In addition to the site developments and buildings mentioned above, the updating of the high-rise guidelines and the revision of the building and zoning regulations are among the most important tasks entrusted to Zurich’s urban planning department. The aim of these planning instruments is to find a way of dealing with monument protection, the inventory and the ISOS and to reconcile this with the planned building developments.

    Which areas in Zurich are particularly attractive for companies and why?
    This is highly dependent on the size and type of company; each company defines its own individual requirements for the choice of location. For a corporation that wants to develop and expand its own site in the long term, other locations are certainly considered attractive than for an SME that aims to develop within the neighbourhood.

    In principle, all neighbourhoods in Zurich are attractive, as there are good public transport connections everywhere. There has been a positive development here compared to recent years and decades – Zurich no longer has a real “periphery”.

    Where do you still see development potential and how could this be tapped?
    There is potential in cooperation with neighbouring municipalities. One of the special features of spatial planning is that it does not end at the city boundary, even if this boundary means a political change. Examples of this are the Limmat region or the Glattal with its shared public transport service. In these areas, it is important to coordinate planning across borders in order to secure the services and networking of the neighbourhoods.

    There is also potential in coordinating with the canton or federal government on issues such as noise and ISOS. Federal or cantonal regulations have a major impact in a city like Zurich. I see great potential in closer coordination with the association of cities.

    How is Zurich positioning itself in the area of mobility development and planning?
    In the municipal structure plan, the focus for urban mobility is on efficient and well-developed public transport and the further development of functional and attractive urban and street spaces. We are striving for a city of short distances. Neighbourhood centres will be strengthened and new ones developed. It will become more attractive for residents to shop locally, and retailers will open new shops in the neighbourhood as they can count on customers.

    The mobility figures show that the urban population is increasingly relying on bicycles and public transport. The city is specifically promoting walking and cycling in particular. The city provides targeted advice to companies and property managers through the “Impuls Mobilität” programme.

    Has the pandemic brought about changes in Zurich’s planning?
    Public spaces have become more important during the coronavirus pandemic. Especially for children and young people, who are dependent on open spaces in their immediate neighbourhood. On the whole, individual transport modes such as walking, cycling and driving have become more important, while public transport has been avoided due to the potential risk of infection. It is important to take the positive effects of the pandemic, such as the use of bicycles and the smoothing of traffic peaks through increased working from home, into the future.

    The pandemic and mobile working have brought about changes whose effects on urban planning we will only see in a few years’ time. In Zurich, neighbourhood centres in particular are also benefiting from the home office trend. During the pandemic, quick access to shopping, healthcare facilities, sports centres, restaurants and green spaces that did not require public transport was key. More attention must be paid to the need for liveable urban spaces in the future.

    What factors make Zurich an attractive place to live?
    Zurich is attractive and offers a high quality of life. There are many reasons for this: For example, the wide and attractive range of childcare and cultural facilities, attractive open spaces, educational centres, good infrastructure and high architectural quality. The location by the lake and the proximity to nature are also attractive. Despite lively building activity, the urban neighbourhoods have not lost their identity. In my opinion, this is a great strength of our city.

    How do you envisage the ideal development of the city of Zurich?
    What would be the core elements?

    Ideal is the wrong phrase in this context; there is no such thing as ideal development. Rather, urban planning is dynamic and is significantly influenced by political decisions. It must continuously respond to current and future socio-spatial and ecological concerns. It is important that we have a common vision of what Zurich should be and how it should develop in the future. The municipal structure plan formulates a target image, from differentiated structural densification and sufficient open spaces for recreation to the city’s centres and infrastructure. Below this, there are countless smaller levels, projects and events that are part of the city in transition. Zurich has a lot of potential that needs to be secured and utilised through urban planning. Not overnight, but for future generations of Zurich residents.

  • Environment, costs and aesthetics: a comparison of concrete and wood

    Environment, costs and aesthetics: a comparison of concrete and wood

    Pro wood: the sustainability and warmth of wood
    Wood, a natural and regenerative material, has been used in construction for thousands of years and is currently experiencing a revival in modern architecture, particularly in the area of sustainability and environmental protection. As it grows, wood binds CO2, which can help to reduce carbon dioxide emissions and thus counteract climate change. In addition, wood offers a warm and inviting aesthetic that is appreciated in many design concepts.

    Pro concrete: robustness and durability
    Concrete, a mixture of cement, water, sand and rock, is characterized by its remarkable strength and durability. It is highly resistant to fire, water and pests, making it a popular building material for a wide variety of structures such as high-rise buildings and bridges. In addition, concrete has excellent sound-absorbing properties and can be shaped into any desired form, which underlines its versatility.

    Contra wood: Wood used in construction is more susceptible to fire, pests and moisture. Special measures are therefore required to protect and maintain it.

    Contra concrete : The production of concrete is very energy intensive and results in a significant amount of CO2 emissions, which raises concerns about its environmental impact.

    The decision between concrete and wood depends on several factors, including the specific requirements of the project, environmental impact, cost and desired aesthetics. Concrete is prized for its strength and durability, while timber offers benefits in terms of sustainability, carbon footprint and natural beauty. Careful consideration of these characteristics is critical to making an informed decision that meets both the short-term needs of the project and the long-term goals of sustainability and environmental protection.

  • Evolution of living space design

    Evolution of living space design

    Living space design through the ages
    The amount of space required per resident has increased from 25 m² in 1950 to around 46 m² today. As a result, room layouts have changed: What used to be a family flat is now a flat for singles and childless couples. Instead of two small WCs, a spacious bathroom is now preferred, and instead of a separate kitchen and dining room, an open-plan kitchen with a cooking island. In addition, personal demands and legal requirements in terms of building physics and ecology have increased. The question of basic services has evolved into the question of the appropriate quality of living space.

    Cost savings through denser construction
    In today’s housing estates of the economic upswing, there is an opportunity to achieve a more efficient use of building space through denser construction and taller buildings. Particularly in areas close to city centres with high building land values, refurbishment is often preferred to new builds. It is also important to consider the ecological significance of building decisions in view of Switzerland’s dwindling reserves of building land. The country’s settlement area has grown considerably in recent decades. Simple volumes, well thought-out spatial sequences and compact construction with high utilisation rates can save costs and counteract urban sprawl.

    Thermal insulation of buildings in need of renovation
    Energy-efficient modernisation of a building from the 1970s can reduce energy consumption by up to 90%. In order to optimise thermal insulation, external components such as exterior walls, roofs or the attic must be renovated. Sometimes heat is also lost undetected through an insufficiently insulated basement ceiling. The windows in particular represent weak points in the exterior walls in terms of heat and sound insulation. Building thermography with a thermal imaging camera can be carried out to assess the thermal insulation. In addition, the differential pressure measurement method (blower door test) can be used to test the airtightness of the building envelope.

    Efficientexterior wall renovation with wood
    Exterior walls are complex components that fulfil important building physics functions such as moisture protection, sound insulation and thermal insulation. When renovating façades, wood can be used as a substructure, formwork and thermal insulation. Insulation materials such as rock wool, glass wool, sheep’s wool or flax can also be used. The renovation of external walls is nowadays also carried out using prefabricated lightweight façades in frame construction. This concept of completely re-cladding a building and giving it a new appearance at the same time has proven to be extremely successful. As a result, new extensions and additions can also be architecturally combined with the existing building to form a new unit.

    Optimisation of rooms
    During interior renovations, rooms are redesigned to meet the new requirements. New partition walls, panelling and suspended ceilings are created. New sanitary and electrical installations are inserted into the wooden slats. The cavities are filled with insulating materials and then planked with gypsum, cement or wood-based panels to meet the requirements for fire protection, sound insulation and moisture resistance. Finally, the joints are filled by the plasterer and the surfaces are re-plastered. Perforated or slotted wooden materials are used as acoustic panels to improve room acoustics.

    Tips for old floors
    Unevenness in old floors can be levelled out using various measures. Fine filler or levelling screed are suitable for slight unevenness, while dry fills are usually used for larger unevenness. Flowing screeds made of anhydrite or cement are used for larger areas. Impact sound insulation is essential to reduce sound transmission to rooms below. In bathrooms and damp rooms, surfaces are provided with suitable sealing compounds and tapes to protect against water penetration. Designed outdoor areas such as wooden terraces and conservatories help to improve the quality of living. Balconies, terraces, loggias or conservatories can be added or extended as part of façade and interior renovations. Thanks to hard-wearing types of wood and treated timber, it is also possible to construct wooden structures that are subject to heavy use.

    Wooden structures for living space extensions
    The potential of a building can be fully utilised by taking local building regulations into account and selecting the appropriate building services. Additions or loft conversions offer the best opportunity to create more living space on the same floor area. Due to its low dead weight, construction engineers often opt for timber when adding storeys, as this usually means that the load-bearing structure and foundations do not have to be additionally reinforced. Prefabricated timber elements can be lifted to the top floor using a mobile crane. Choosing a construction method with a high degree of prefabrication reduces the workload on the construction site and the rooms can be occupied quickly. This means that residents and neighbours are hardly affected by noise and dust.

  • GF tackles expansion of Klostergut Paradies

    GF tackles expansion of Klostergut Paradies

    The Paradies Foundation, which belongs to GF, wants to upgrade its Klostergut Paradies estate in Schlatt. To this end, a hotel is to be built on the site of the GF conference and seminar centre and the existing restaurant is to be renovated and converted in an environmentally friendly manner, GF announced in a press release. The Schaffhausen-based industrial group is investing around CHF 10 million in the project.

    The hotel will serve the company’s seminar and meeting guests. However, the planned 34 rooms will also be available to other guests, particularly at weekends and during holiday periods. The Paradies restaurant, which was previously only open in summer, will be open all year round following the renovation work. The new construction and remodelling will create around 15 new jobs in Schlatt.

    In connection with the project, GF is examining the wish expressed by nature conservation and environmental organisations to renaturalise the banks of the Rhine near the restaurant and hotel together with the energy company SH Power, writes GF. The Müli stream has already been renaturalised during the preliminary work and a cold-water bay has been added.

    Following the granting of the necessary building permits in recent weeks, construction work is set to begin in June. Completion is scheduled for the end of December 2025. The restaurant will remain closed during the construction work and will be replaced by a sunset bar at weekends during the summer months.

  • Biogas production attracts interest in Laufental-Thierstein

    Biogas production attracts interest in Laufental-Thierstein

    Erdgas AG Laufenstein-Thierstein(GASAG), based in Münchenstein, is clarifying where a biogas plant can be built in the region and how it can be financed. The plant would have to be located near a gas pipeline, for example at the Müsch gas station in Laufen, it writes in a letter to farmers in the region. For building law reasons, farmers would have to own the biogas and processing plant. GASAG would guarantee the purchase of the biogas.

    The regional gas supplier based in Münchenstein has had a potential survey carried out in recent months. According to a press release, BOHA AG, which it commissioned, asked 38 farmers in the region whether they would be prepared to supply slurry and manure and accept the residual materials. 23 farmers with a maximum total of 2000 livestock units declared their willingness to participate. This corresponds to a potential of 7 to 8 gigawatt hours. This could cover 20 per cent of GASAG’s consumption.

    Founded in 1993, GASAG is owned by Primeo Wärmeholding AG, the municipalities of Breitenbach, Büsserach, Dittingen, Meltingen and Zwingen and the town of Laufen. The business is managed by Primeo Energie.

  • Company secures CHF 3 million for compressed air energy storage system

    Company secures CHF 3 million for compressed air energy storage system

    Green-Y Energy AG has successfully completed a financing round led by Swiss capital Global Impact Fund AG totalling CHF 3 million. The company, which specialises in compressed air energy storage and is based in Hasle near Burgdorf, intends to use the additional capital to further optimise its innovative storage technology and drive forward the marketing of the systems, CEO Rafik Barhoumi was quoted as saying in a press release. The solution is considered to be particularly sustainable as it uses compressed air to store photovoltaic electricity and also enables the supply of heating and cooling in buildings and processes.

    After a four-year development phase, a pilot system with a total capacity of 100 kilowatt hours was successfully launched in 2023, according to the press release. This can be used to optimise self-consumption in commercial areas. In residential and office buildings, the system could support space heating, water heating and cooling. Industrial companies could utilise the heat and cold generated in production processes.

    The system makes “economic and ecological sense if the storage of electrical energy is combined with the utilisation of heat or cold. This is why compressed air storage systems are particularly suitable for neighbourhoods, larger office buildings and industry,” says Christian Ochsenbein, an expert in storage technologies and head of the Swiss Battery Technology Center.

  • Losinger Marazzi implements climate strategy in its projects

    Losinger Marazzi implements climate strategy in its projects

    What climate strategy is Losinger Marazzi pursuing?
    Lennart Rogenhofer: With our climate strategy, we are pursuing the goal of reducing our CO² emissions by 30 per cent by 2030 compared to 2021. We will achieve this by focussing more on timber construction and renovation projects and by treating sustainability as a key issue in all projects. We are pursuing a scientific approach in accordance with the Science Based Targets Initiative, which also audits our target achievement, among other things.

    How is the strategy being implemented in practice?
    We have been fully integrating sustainability into our corporate strategy for years. Examples of this include the major projects Greencity in Zurich (Switzerland’s first 2000-watt site under development in 2012), Erlenmatt West in Basel (Switzerland’s first 2000-watt site in operation in 2013) and the sustainable Églantine neighbourhood in Morges in 2019.

    Following further in-depth steps in recent years, we are systematically implementing our climate strategy. Since 2019, we have been consistently preparing a carbon footprint for the construction and operation of buildings for each project – i.e. over the entire life cycle of a project and regardless of the environmental labels we are aiming for. This has enabled us to build up a database of experience that makes it possible to estimate and reduce the emissions of future projects.

    What goals is Losinger Marazzi pursuing with regard to timber construction?
    Timber construction is a focal point of Losinger Marazzi’s climate strategy. This involves focussing more on building materials with low CO2 emissions, such as wood. Our climate strategy aims to minimise the life cycle emissions of a building during its construction and operation from the design stage onwards. The increased use of wood is naturally an important element here, always according to the principle of “the right material in the right place”. This means focussing on local, lightweight, bio-based materials where they are best suited in terms of their technical properties and have the greatest impact on sustainability. In addition to a reduction in CO2 emissions, this can also mean better deconstructability or a contribution to a pleasant indoor climate, for example. We are already implementing this strategy in projects such as the Greencity construction site B6 (Vergé), the administrative building of the Canton of Lucerne and the BERN 131 service building.

    Current projects:
    Greencity Baufeld B6 (Vergé)
    In Zurich with an optimised energy concept (100 % renewable) and a materialisation fully geared towards sustainability (timber façade, lightweight interior walls, slim supporting structure, etc.)

    Administrative building of the Canton of Lucerne
    For around 1500 employees at Seetalplatz in Emmenbrücke (LU), including a timber atrium, SNBS Gold and Minergie-P-ECO certification

    Service building BERN 131
    In Wankdorf Bern with photovoltaic modules on the roof and façades, timber construction and SNBS Gold certification

    Côté Parc
    urban regeneration projects in Geneva and Spenglerpark in Münchenstein (BL), in which the focus was actively on utilising and upgrading the existing buildings instead of demolishing new ones

  • Potential for transformation despite development delay in Basel

    Potential for transformation despite development delay in Basel

    The study conducted by Sotomo shows that Basel has experienced subdued growth momentum over the last ten years, particularly in comparison with cities such as Zurich, Geneva and Bern. With only six per cent growth in the housing stock since 2012, Basel brings up the rear among the eight largest Swiss cities. Only a small proportion of flats were built after 1990, which suggests a delayed development dynamic.

    Demographic challenges and opportunities
    The study also emphasises that Basel is the only city in the study that does not have a birth surplus, which indicates a weak population dynamic. The comparatively low proportion of young adults and families and the high proportion of older households reflect a demographic challenge that also influences the development of the labour market.

    Despite these challenges, the study emphasises that new-build flats do not necessarily lead to higher rents in existing flats. On the contrary, they could even revitalise the market for affordable flats in older buildings. This points to untapped opportunities in urban planning and development.

    The potential of “Klybeck Plus
    One particularly striking example of untapped potential is the planned “Klybeck Plus” urban quarter. This area is to be built on a former industrial site and offers space for flats for 8,500 people and 7,500 jobs. similar to Basel’s Gundeli or Geneva’s Le Pâquis neighbourhood, “Klybeck Plus” could offer a lively mix of living and working and at the same time be as green as Basel’s Gellert district.

    The study emphasises that, despite current challenges, Basel has considerable potential that can be exploited through strategic planning and innovative development concepts. The results are a wake-up call for urban planners, developers and political decision-makers to mobilise the available resources and reposition Basel as a dynamic and future-oriented city.

  • High-temperature solar power plants for continuous energy supply

    High-temperature solar power plants for continuous energy supply

    The centrepiece of 247Solar’s technology is a high-temperature heat exchanger developed by David Gordon Wilson, Professor Emeritus at MIT. By integrating this heat exchanger into a conventional turbine similar to a jet engine, efficient and emission-free energy generation becomes possible. The turbine utilises hot air, which is heated to around 1,000 degrees Celsius by solar energy, to produce both electricity and heat.

    Solar power plant with integrated energy storage
    An innovative component of this system is combined heat and power generation, supplemented by thermal energy storage. These store heat in solid materials, which can then drive the turbine when solar radiation is not available. This enables a continuous energy supply, regardless of the time of day and weather conditions. The generation capacity of the model presented is 400 kilowatts of electricity and 600 kilowatts of heat.

    The modular design of the system offers a wide range of possible applications, especially for remote or self-sufficient communities. This technology is ideal for combining with other renewable energy sources such as wind power to provide a holistic and sustainable energy supply.

    Bruce Anderson, Managing Director of 247Solar, emphasises that the main aim of developing this system was to overcome the intermittency issues of conventional renewables. The ability to provide uninterrupted energy represents a significant advance in the utilisation of renewable energy sources and could play a key role in the global energy future.

  • Zurich’s dynamic step into the circular economy

    Zurich’s dynamic step into the circular economy

    The implementation of “Circular Zurich” began in early February with the presentation of a detailed agenda that is specifically tailored to the needs of the city administration. However, the strategy also offers small and medium-sized enterprises (SMEs) numerous starting points. By adapting individual measures, SMEs can not only act in a more environmentally friendly way, but also benefit financially in the long term.

    Steps for implementation in SMEs
    One fundamental aspect of the circular economy is the efficient recycling and separation of recyclable materials. Sara Graf, project manager at Entsorgung + Recycling Zürich (ERZ), emphasises the importance and simplicity of this measure for companies: recyclable materials such as paper, cardboard, PET bottles, glass and aluminium cans can often be recycled free of charge, which leads directly to savings in disposal costs. But recycling is just the beginning.

    Minimising material consumption and optimising processes
    Sonja Gehrig, who heads up the city-wide coordination of “Circular Zurich”, points out that it is important to think beyond the boundaries of the company. Analysing one’s own material consumption and optimising production processes are crucial steps. Ecologically sustainable product design that promotes the reparability and durability of products can not only save companies money, but also lead to new business models such as product hire.

    Extending consumption and use phases
    The final step involves maximising product lifetimes through strategies of sharing, reusing, repairing and remanufacturing. This not only allows products to be used for longer, but also helps to conserve resources. Second-hand platforms and company initiatives that internalise the circular economy are playing an increasingly important role in the circular economy.

    The city as an innovation laboratory
    Zurich sees itself as a testing ground for new, circular ideas and products. City experts are ready to support companies that are striving for innovative solutions. This proactive approach not only strengthens the city’s infrastructure, but also promotes the widespread adoption of circular economy principles.

    With “Circular Zurich”, the city of Zurich is positioning itself as a pioneer in the circular economy, demonstrating how a sustainable transformation can be realised in urban areas through concrete measures and cooperative approaches.

  • Partnership for a sustainable energy supply in Volketswil

    Partnership for a sustainable energy supply in Volketswil

    Energie 360° and Vantage Data Centres have entered into a partnership to set up an energy network. The data centre operator based in the US state of Colorado is planning to build a new data centre campus in Volketswil. According to a press release, the planned utilisation of waste heat at the new site will create the “ideal energy source for an energy network”. “We are delighted about this partnership and the fact that we can make a contribution to the decarbonisation of the energy system,” Wolfgang Zepf, Country Manager of Vantage Switzerland, is quoted as saying.

    Construction of the energy centre is scheduled to begin in summer 2025. From the end of 2028, 70 megawatts of neutral thermal energy are to be generated for 7,000 households in the municipalities of Volketswil, Greifensee, Schwerzenbach and Effretikon.

    Consumers will probably not have to wait that long. In order to be able to supply heat from the energy network as soon as possible, work has begun on creating a climate-friendly interim solution, according to the statement: “In order to utilise synergies with other construction work, Energie 360° is already building part of the transport pipeline between Volketswil and Effretikon. The first properties could be supplied with climate-friendly heat as early as the end of 2026.